Couldn't load pickup availability
Moisture-curing one-component polyurethane foam specially developed for use with assembly guns
Field of Application:
Suitable for filling joints on windows and roller shutter boxes and insulating cavities.
Advice:
The substrates must be stable, clean and free of dust, grease and release agent. Dampen dry substrates with water (spray). The ideal application temperature is +20°C. Observe the operating instructions of your gun. Shake the can well at least 30 times before screwing onto the assembly gun and after work interruptions. Do not tilt or overtighten when screwing onto the gun. Remove any fresh splashes of foam immediately using PU universal cleaner. Cured foam can only be removed mechanically.
Not suitable for PE, PP, silicone, PTFE
Not UV-resistant
Please observe the safety instructions on the can and the information on the safety data sheet.
Advantages:
Greatly increased yield
Accelerated curing
Very high adhesive strength
Good thermal and acoustic insulation
Noise protection tested by ift
Contents:
500 ml
Free deliveries to all of Malta and Gozo for purchases of €50 and over or a charge of €10 for purchases under the €50 mark.
We will try and deliver within 3 - 4 days. Please also note that deliveries to Gozo might take up to 4 -5 days.
Clients choosing Store Pick Up need to first receive a call from our team who will be advising that order is ready for collection.
Our delivery team will only deliver at ground floor level. Please also note that any needed permits, crane and lifter service costs are to be taken care of and paid for by the client.
All our bulky products come flat packed. Should you need installation for the purchased product/s, kindly highlight to our customer care representative when contacted for delivery. An installation fee will be charged on delivery. Installation is only available on furniture and BBQ units.
No manuals or assembly files available.