Fila CR10 1L - Epoxy Grout Residue Cleaner

High Viscosity Liquid Detergent To Clean The Surfaces Of The Residue, Stains And Traces Of Epoxy Mortar. Ideal For Non-Absorbent Materials Such As Porcelain Stoneware, Enamelled Ceramics And Glass Mosaics. Benefits: Thanks To Its Viscosity, It Eliminates Stains And Traces Of Epoxy Mortar. Also Effective On Old Tailings. Easy To Apply. Respect The Material. Pleasant Scent Of Almond. Dilution: Pure To 1:1 Depending On The Type Of Residue. Performance: With A Liter Of Product. Up To 10 M2. Application: Shake Before Use. Elimination Of Hardened Mortar Residues (Once Past The Deadline For Implementation Of The Grouting Used Product): Apply Undiluted With A Brush Covering Perfectly All Residues. Leave For 30 Minutes. Rub With An Abrasive Sponge Or With A Spatula For The Thicker Residues. For An Application On The Ground, It Is Possible To Intervene In The Mono-Brosse Using The Appropriate Disc. Rinse. In The Case Of Stubborn Residues, Repeat The Application Leaving The Product Act Any Longer. Elimination Of Fresh Tailings: Wait About An Hour After The Grouting. Dilute The Product In The Water At 1:1. Apply And Work The Product With A Soft Buffer Without Too Much Pressure. Rinse. So As Not To Damage The Fresh Joints, Do Not Leave The Product For More Than 2-3 Minutes. Attention: Always Perform A Test On A Small Area To Test The Strength Of The Material And Determine The Optimal Waiting Time For Cleaning. Do Not Use On Absorbent Materials. Do Not Use On Wood. Do Not Use On Surfaces In Methacrylate. Check The Resistance Of The Metal Surfaces On The Product. Do Not Use This Product On: Absorbent Materials, Wood, Methacrylate Surfaces.