Cosmos Spray Primer Grey 400ml

Product Description: Primer for Difficult Metallic Surfaces This high-quality, one-component anti-corrosion primer offers excellent adhesion to challenging surfaces such as aluminum, galvanized substrates, polyesters, and non-corrosive metals. It is specially designed to work with all types of coatings, providing maximum protection against corrosion and other potential damage. The primer creates a neutral surface for other coatings, ensuring maximum longevity and the best possible aesthetic finish. Cosmos LAC Primer Sprays are intended to pre-treat and prepare surfaces, offering even greater adhesion and protection before painting. Characteristics: Quick application primer for perfect pretreatment of metal surfaces Protects against rust Improves adhesion to metal surfaces High coverage Enhances the gloss level of the paint Protects against oxidation Drying time varies depending on temperature and humidity Easy application 400 ml Use: Ideal for difficult surfaces such as aluminum, galvanized substrates, polyesters, and non-corrosive metals. It is designed to work with all types of coatings to provide maximum protection against corrosion and other potential damage. Features: Flat spray angle Adjustable injector Uniform spray Suitable for large surfaces Suitable for calligraphic effects Tips: Shake the container for at least 3 minutes after hearing the ball. Before first use, spray into the air for 3-4 seconds with the black valve to remove any concentrated paint from the inner tube. Test the spray on a test surface first. Avoid pressing the nozzle while holding your hand steady to prevent paint runs and "tears." Apply a second coat with a 10-minute interval for best results. Paint at temperatures between 10-25°C and humidity below 65%. After use, turn the container upside down and spray for 3 seconds. Store between 5-35°C. Application Instructions: Ensure the surface is clean, smooth, and dry. Always use personal protective equipment (gloves/mask). Paint in a well-ventilated area. Keep the area as dust-free as possible. Protect the surrounding area to avoid accidents. Sand carefully and remove any residue. Test on a test spray surface first. Always spray with the can in a vertical position to avoid uneven spraying. Spray the surface from a distance of 25-30 cm. Spray first vertically, then horizontally. Apply several thin layers, spraying in quick motions. Allow each coat to dry for at least 5 minutes. Can be painted after 3 hours. After use, clean the spray valve by turning the aerosol upside down and pushing the nozzle for about 5 seconds.