Showing 1–24 of 87 results

Show sidebar
Close

Truper Micro Wire Welding Reel, 0.8Mm

48.60
Flux Cored Low Carbon Steel (Must Be Used Without Gas). Excellent Feeding And Arc Stability. Supports Transfer By Short Circuit,
Close

Truper Somi-210 Welding Torch

42.60
3Mtrs In Length. Ergonomic Handle Made Of Nylon For Easy Handling. Input Terminals For Quick Connection. Light And Flexible Cables.
Close

Cable For Welding Machine Sot-300/200, With Ground Clamp Cab-300

38.20
Cab-300: Stik Electrode Holder And Cable Set, Replacement For Sot-300/200
Close

Truper Cable For Welding Machine Sot-225, With Ground Clamp Cab-225

35.20
Cab-225: Cables W/ Ground Clamp Set, Replacement For Sot-225
Close

Truper Somi-210 Micro Wire Welding Reel

31.50
Made Of Copper Plated Steel For Long Life. Excellent Feeding And Arc Stability. Supports Transfer By Short Circuit, Axial Spray
Close

Truper High Speed Steel Drill Bit 25.4Mm

26.10
Specifications: Measure 25.4Mm. Reduced And Non-Slip Stilt P3 12.7Mm. Length 254Mm. Tip Angle 118 °.
Close

Truper Diamond Drill Bit, 89Mm

24.75
Diameter 89Mm. Hardness 20 Hrc. Thickness 1.2 Mm.
Close

Truper Reinforced Hose For Oxyacetylene, 7.5 M

22.99
Specifications: Length 7.5M. Internal Diameter 1/4 “(6.3Mm). Maximum Pressure 2,068.4 Kpa (300Psi). Weight 2.62 Kg. / Characteristics: Manufactured In Rubber
Close

Truper High Speed Steel Drill Bit 22.2Mm

21.10
Specifications: Measure 22.2Mm. Reduced And Non-Slip Stilt P3 12.7Mm. Length 228.6Mm. Tip Angle 118 °.
Close

Truper Wood Saw Blade 10″, 80 Teeth, 5/8″ Center

18.75
Diameter 10″(250Mm). Axis (Center) 5/8″(16Mm). High Frequency Brazed Tungsten Carbide Teeth. Expansion Slots That Reduce Vibration, Sound, And Heat Generation.
Close

Truper Wood Saw Blade 12″, 40 Teeth, 1″ Center

18.30
Diameter 12″(300Mm). Axis (Center) 1″(25Mm). High Frequency Brazed Tungsten Carbide Teeth. Expansion Slots That Reduce Vibration, Sound, And Heat Generation.
Close

Truper High Speed Steel Drill Bit 15.8Mm

14.30
Specifications: Measure 15.8Mm. Stilt 12.7Mm. Length 177.8Mm. Tip Angle 118 °. Tip Hardness 66 Hrc.
Close

Truper Emery Corrugated Wavy Wire Brush, 8 X 1-1/8″, Ca-109

13.99
Diameter 203.2Mm. Thickness 28.5Mm. Corrugated High Carbon Steel Wire. Medium Bristles. For Use With Bench Grinder.
Close

Truper High Speed Steel Drill Bit 14.2Mm

13.00
Specifications: Measure 14.2Mm. Stilt 12.7Mm. Length 177.8Mm. Tip Angle 118 °. Tip Hardness 66 Hrc.
Close

Truper Masonry Drill Bit 25.4Mm, 152.4Mm Long

9.75
Specifications: Measure 25.4Mm. Stilt 12.7Mm. Length 152.4Mm. Tip Angle 130°.
Close

Truper Wood Saw Blade 8-1/4″, 24 Teeth, 5/8″ Center

9.35
Diameter 8 1/4″(209.5 Mm). Axis (Center) 5/8″(16Mm). High Frequency Brazed Tungsten Carbide Teeth. Expansion Slots That Reduce Vibration, Sound, And
Close

Truper Router Bit , Dove Chest, With Bearing, Cutting Length 17.5Mm

9.10
Cutting Diameter 34.9Mm. Cutting Length 17.5Mm. Length 60Mm. Stilt 6.3Mm. Cutting Speed 15000Rpm. Pigeon Chest Drill With Bearing. Blade Made
Close

Truper Masonry Drill Bit 22.2Mm, 152.4Mm Long

8.30
Specifications: Measure 22.2Mm. Stilt 12.7Mm. Length 152.4Mm. Tip Angle 130°.
Close

Truper Grinder Wheel Emery Stone, Almuminium Oxide, Grain 60, 25.4Cm

8.20
Made Of Aluminum Oxide. Uses: For All Types Of Steel And Ferrous Materials. For Esba-1-1 / 4X10 Bench Emery.
Close

Truper Grinder Wheel Emery Stone, Almuminium Oxide, Grain 36, 25.4Cm

8.20
Made Of Aluminum Oxide. Uses: For All Types Of Steel And Ferrous Materials. For Esba-1-1 / 4X10 Bench Emery.
Close

Truper Welding Electrode Clamp 500A

8.10
Robust Jaws Made Of Brass. Fiberglass Reinforced Insulation Covers High Temperature Resistant. High Copper Alloy Content For Excellent Electrical Conductivity.
Close

Truper High Speed Steel Drill Bit 11.5Mm

7.10
Specifications: Measure 11.5Mm. Stilt 9.5Mm. Length 152.4Mm. Tip Angle 130 °. Tip Hardness 66 Hrc.
Close

Truper Wood Saw Blade 10″, 40 Teeth, 5/8″ Center

7.00
Diameter 10″(250Mm). Axis (Center) 5/8″(16Mm). High Frequency Brazed Tungsten Carbide Teeth. Expansion Slots That Reduce Vibration, Sound, And Heat Generation.
Close

Truper Sanding 7″ Disc With Fibre Backing, 50 Grit, 5Pieces

7.00
External Diameter 7 “. Internal Diameter 7/8 “. Grain 50. Maximum Speed 8 600 R / Min.